On Site Flow and Purity Measurement

Thanks to our invincible flow measurement and purity measurement technologies, we are confident about measuring any system performance on site. Tests we have done so far on site are included but not limited to:

  • Compressor Performance Verification (ISO1217:2005 - Acceptance Test)
  • Refrigerated Compressed Air Dryer Performance Test (Flow Vs Dewpoint & Pressure Drop)
  • Desiccant Compressed Air Dryer Performance Test (Flow Vs Dewpoint & Pressure Drop)
  • Compressed Air Filter Performance Test (Flow Vs Pressure Drop)
  • Nitrogen Generator Performance Test (Purity Vs Dewpoint)
  • Validation of Compressed Air Flow Meters
    • Thermal Mass
    • Vortex
    • Ultrasonic
    • Pitot Tube

Compressor Performance Acceptance

If you need to validate the performance of your compressor according to ISO1217:2005, you can only do it by Sonic Nozzle or Orifice/Venturi Flow Meter. The other flow meters can be accurate or even calibrated but not accepted since the standard directs to use only this two type. So please make sure you have asked for the correct solution from your solution partner or it might lead a complicated situation.

Flow Meter Validation

We have flow meters that are used as transfer standard, which you can use for validation and even calibration of other type flowmeters. You may use different type of flowmeters in your line for your own purposes. Maybe calibration costs too much and you avoid it, but for a good reason, you can validate your flow meters with our service at an acceptable price.

 

Air Treatment Equipment Peformance Tests

We can test the performance of your air treatment equipment including inline filters, desiccant dryers, refrigerated dryers and even nitrogen generators. If you need to verify the equipment performance, we can help you about it.